Pump, volumetric distributors and tubing — one system, one invoice.
Pump price: €210 + VAT
A gear pump with fully automatic control: set the lubrication time and interval, and the pump feeds oil to every point through volumetric distributors. A pressure sensor verifies each cycle — if pressure is not reached you get an alarm instead of downtime.
| Working pressure | 20 bar |
| Flow | 150 ml/min |
| Running time per cycle | 1 – 60 s |
| Interval between cycles | 3 – 999 min |
| Supply | 220 V |
| Tank | 1,5 l |
| Oils | ISO VG 15 – 68 |
A pump alone does not lubricate — it needs a distribution line. We supply the whole set: volumetric distributors with 2–6 outlets, T-manifolds and brass bridges, nylon and copper tubing, high-pressure tube, nozzle joints and mountings. Hand pumps for smaller machines and brush lubricators are in the range too.
During the cycle a pressure sensor measures backpressure in the line. When the volumetric distributors fill, flow is blocked, pressure reaches the set level and the cycle ends. If pressure is not reached, the pump raises an alarm — a possible leak or empty tank.
Fresh industrial oil in the ISO VG 15–68 range (measured at 40 °C): hydraulic oils, circulating oils or slideway oils for CNC guideways. Colder environments — lower viscosity (VG 15–32), warmer or heavier loads — VG 46–68. Never reuse oil.
Guideway rails and ball screws on CNC machines, chains, linear bearings, woodworking and textile machinery, lifts — anywhere regular manual lubrication is costly or gets forgotten.
Yes — pump, volumetric distributors, T-manifolds, nylon and copper tubing, nozzles and mountings in one order, on one invoice. Installation available if needed.
Describe the machine and the number of lubrication points — we reply with a configuration and a price.
